Do you know how to install the soundproofing wood wall panels?

When you want to use our Akupanel to decorate you wall, do you know how to install it?

There are some installation procedure of the akupanel, pls help to check :

1. Obtain the following tools and materials: akupanel, electric drill, screwdriver, screws, nails, ruler, pencil, etc.

2. Measurement and marking: Use a ruler and pencil to measure and mark the location and spacing of the akupanel installation.

3. Pre-drilling: Using an electric drill and an appropriately sized drill bit, pre-drill holes in the marked locations for installing screws.

4. Install the akupanel: Place the akupanel in the pre-marked position, and use screws and screwdrivers to fix the akupanel to the wall or other supports.

5. Check the level: Use a level to check whether the akupanel is level. If it is not level, you can use wooden nails or other tools for fine tuning.

6. Complete the installation: After the installation is complete, check whether the akupanel is firm, and there is no loosening or shaking.